TRAINING.

Pre-Start Health and Safety Review

Windsor, Ontario /
Apr 5, 2019 /
Course Code: 09-0425-2361

REGISTER NOW
The confirmation of a course and venue depends on early registration; Register early to avoid the postponement or cancellation of a course.
  • Overview
  • Syllabus
  • Instructor
  • Location

Overview

After Participating in this course, you will be able to:

  • Determine when a pre-start health and safety review (PHSR) is required
  • Know where in the workplace the pre-start health and safety review applies
  • Document an exemption to a PHSR
  • Specify appropriate compliance requirements in your bid documents (RFQs)
  • Select appropriate machine guarding based on a risk assessment

Description:
The Ontario OH&S Act and Regulation 851 Industrial Establishments requires that a professional engineer’s report be prepared whenever a process, equipment addition or modification involves flammable liquids, safeguarding devices, rack/stacking structures, ignition/explosion risk, dust collectors, molten metals, lifting devices or designated substances.

This course focuses on the guidelines for conducting PHSRs and covers machine guarding standards and regulations. You will learn when and where in the workplace a PHSR is required, exemptions and MOL guidelines. The course also incorporates PHSR design considerations, including due diligence, employer obligations, risk assessments and safety circuit performance levels.

Course Outline:

  • Regulation 851, section 7
  • Relevant standards pertaining to PHSRs
  • Ministry of Labour guidelines for PHSRs
  • Under what circumstances a PHSR is required
  • Where in the workplace a PHSRs applies
  • Due diligence and employer obligations
  • Design considerations relevant to PHSRs
  • Risk assessments
  • PHSR exemption documentation requirements
  • The PHSR report

Who Should Attend:
Plant Engineers and Managers • Process Engineers • Project Managers • Project Engineers • Manufacturing Engineers • Equipment Integrators Automation Professionals • Technical Specialists • Controls Designers • Operations and Maintenance Managers • Plant Safety personnel

More Information

Syllabus

Daily Schedule
8:00 Registration & Coffee (Day 1 only)
8:30 Seminar begins
12:00 Lunch (provided)
4:30 Adjournment

There is a one‐hour lunch break each day in addition to a refreshments and networking break each morning and afternoon. Lunch and refreshments are provided.

Welcome, Introduction, Workshop Preview, Learning Outcomes, and Assessment Method

Standards and Regulations

  • CSA Safeguarding standards
  • The Occupational Health and Safety Act
  • Ontario Regulations

Section 7 of the Regulation for Industrial Establishments

  • What is a Pre-Start Health and Safety Review
  • Where in the workplace they apply
  • When is a PHSR required
  • TABLE 1 form O.Reg. 851
  • Due diligence and employer obligations
  • Reviewer's qualifications

Safeguarding of Machinery

  • Design considerations relevant to PHSRs
  • Hierarchy of controls
  • Risk Assessments
  • Types of safeguarding
  • Safety relays
  • Safety circuit performance levels
  • Safe distance calculations
  • Documentation required for Exemptions

Flammable Liquids

  • Definitions
  • Storage and Dispensing
  • Exceptions

Racking and Stacking Structures

  • Definitions
  • Professional Engineers’ drawings and calculations
  • Exemptions and supporting evidence

Explosion Hazard

  • Explosive mixtures
  • Ventilation
  • Explosion venting, baffles, chokes, and dampers
  • Exemption for spray booths

Dust Collectors

  • Combustible dust
  • Location and fire separation requirements
  • Explosion design and venting
  • Exceptions

Lifting Devices

  • Definition
  • Load markings
  • Initial examination
  • Applicable standards and related sections
  • Exemptions and supporting evidence

Occupational Exposure

  • Biological and chemical agents
  • Designated substances
  • MSDS
  • Exposure limits
  • Ventilation
  • Air sampling

The PHSR Report

  • Minimum requirements
  • Typical layout
  • Things to include
  • Drawings
  • Owners' obligations

Questions and Answers, Feedback on Achievement of Learning Outcomes

Instructor

Tom Norton, P.Eng., CRSP, CHSC

Tom is an electrical engineer and has been conducting pre-start reviews for the past 13 years. He is president of Absolute Engineering Solutions Inc. and participates in many CSA technical committees.

He is a member of the Canadian Society of Safety Engineering, the Board of Canadian Registered Safety Professionals and many CSA technical committees, including Safeguarding of Machinery and the OHS Standards Program Steering Committee.In the course of his career, he has been a guest speaker at several WSPS events, the National Safety Conference on Metalworking, Pulp and Paper Health & Safety Conference, CSA Conference, RIANational Conference and the CSSE National Conference.



Venue

To be announced

REGISTER NOW
NOT INTERESTED IN THIS COURSE?

We always want to improve the quality of our courses. Please select any reasons why you feel this course is inadequate (check all that apply).

Please check this box:
Course Rating
4.4 out of 5

Overall rating of this course by its previous attendees!

Fee & Credits
  • 0.7 Continuing Education Units (CEUs)
  • 7 Professional Development Hours (PDHs)
Early Registration Fee:

$695 + taxes

Fee after February 22, 2019:

$795 + taxes

Register




On-Site Training
This course can be customized and delivered to your group of staff at your facility, saving time and money.
REQUEST A QUOTE
E-Newsletter
EPIC's email newsletter is a great source of information for:

  • course updates
  • surveys
  • informative articles/papers
  • exclusive discounts
Subscribe
Top