TRAINING.

Electrical Power Equipment - Selection, Commissioning and Maintenance

Richmond, British Columbia /
Mar 31 - Apr 2, 2021 /
Course Code: 11-0302-2386

REGISTER NOW
The confirmation of a course and venue depends on early registration; Register early to avoid the postponement or cancellation of a course.
  • Overview
  • Syllabus
  • Instructor
  • Location

Overview

After participating in this course you will be able to do the following:

  • select the most appropriate equipment for your project
  • use diagnostic testing
  • inspect equipment with an awareness of common failure modes
  • apply advanced fault detection techniques
  • cut costs using predictive and preventive maintenance

Description:
Many industries are concerned with the maximum efficiency, reliability, and longevity of electrical equipment. Using the latest technology, this seminar addresses the above objectives by covering the successful operation of motors, variable-speed drives, transformers, generators, rectifiers, inverters, uninterruptible power systems, circuit breakers, and fuses. Participants will learn detailed information about the equipment’s basic design, operating characteristics, specification, selection criteria, advanced fault detection techniques, critical components, and maintenance issues.

Course Outline:

  • Electrical Switching Stresses
  • Substation Components
  • Major Equipment
  • Low and Medium-Voltage Switchgear and Circuit Breakers
  • Short Circuit in Electrical Protection Systems
  • Coordination of Electrical Protection Systems
  • Distribution Transformers
  • Grounding of MV and LV systems
  • Protective Relaying, Control, and Metering
  • Arc Flash Hazard and Mitigation by Design

Who Should Attend:
Electrical and Mechanical Engineers • Technicians and Technologists • Project Engineers • Power Plant Managers • Outage Managers • Maintenance and Operations Engineers • Marine Inspectors • Computer Technologists • Procurement Managers • Sales Managers • Electricians

More Information

Syllabus

Daily Schedule
8:00 Registration & Coffee (Day 1 only)
8:30 Seminar begins
12:00 Lunch (provided)
4:00 Adjournment

There is a one-hour lunch break each day in addition to a refreshments and networking break each morning and afternoon. Lunch and refreshments are provided.

Day I

Welcome, Introduction, Workshop Preview, Learning Outcomes, and Assessment Method

Introduction and Overview

  • Substations types
  • Budgeting and financing
  • Design, Construction and commissioning

Electrical Switching Stresses

  • Current interruption in power systems
  • Recovery transients (RV, TRV, RRRV)
  • Voltage Acceptance Criteria
  • Load, capacitor, and inductor switching
  • Lightning considerations

Substation Components

  • Substations Function
  • Air Insulated Substations (AIS)
  • Gas Insulated Substations (GIS)
  • High and Low Profile substations
  • Substations Bus Arrangement: Single Bus, Double Bus Double Breaker, One and Half Breaker Scheme, Double Main and Transfer, Ring Bus
  • Major Equipment

Transformer

  • Circuit Breaker
  • Fuses (Current and Non-current limiting, Electronic)
  • Air Break Switches
  • Instrument Transformers (Current and Voltage)
  • Surge Arrester
  • Reactor
  • Capacitor Bank
  • Air Insulated Switchgear
  • Bus Bars
  • Control House

Low and Medium-Voltage Switchgear and Circuit Breakers

  • Types of circuit breakers
  • Design criteria and classification of switchgear assemblies
  • Detailed review of ANSI standards
  • Load break switches, ratings, dimensions, construction feature, current limiting, and expulsion fuses
  • ANSI Standards and comparison with IEC Standard
  • Arc Resistant Switchgear

Adjournment

Day II

Short Circuit in Electrical Protection Systems

  • Type of faults
  • Causes of Faults
  • Impact of faults on Substation Components

Coordination of Electrical Protection Systems

  • Types of Protection
  • Study Procedure
  • Time Current Curves
  • Fuse to fuse
  • Circuit breaker to fuse
  • Relay to circuit breaker
  • Backup protection
  • Radial distribution systems

Distribution Transformers

  • Three-phase transformers
  • Impedance transformation through a transformer
  • Classification of transformers
  • Main components of a power transformer
  • Interconnection with the grid
  • Transformer components, maintenance, and troubleshooting
  • Transformer oil and oil Contaminants

Oil Spill prevention techniques

  • Used oil analysis chemical and physical tests

Adjournment

Day III

Grounding of MV and LV systems

  • Types of grounding and their characteristics
  • High- and low-resistance grounded systems
  • Grounding and bonding of HV substations

Protective Relaying, Control, and Metering

  • Instrument transformers
  • Intelligent electronic devices (IEDs)/protective relays
  • Computer based control systems/SCADA systems
  • Sequence of events and fault recording
  • Metering monitoring systems
  • Power quality measurements
  • Integration of protection, control, and metering systems

Arc Flash Hazard and Mitigation by Design

  • Arc Flash hazard
  • CSA Z462 requirements
  • Arc Resistant Switchgears
  • Mitigation alternatives

Preventive Maintenance

  • Setting up a preventive maintenance program
  • Scheduling/monitoring
  • Budgeting/cash control
  • Safety considerations

Life Extension of Transformers and Switchgear Control Equipment

  • Electrical equipment life
  • Limits
  • Mode of failure
  • Tests (Megger, Ductor, Doble)
  • Diagnostic and deterministic procedures
  • Equipment life extension options: replace, rebuild, retrofit

Questions and Answers, Feedback on Achievement of Learning Outcomes

Concluding Remarks and Final Adjournment

Instructor

Khaled Akida, P.Eng., MBA, M.Sc.

Khaled is a registered professional engineer and general manager of TEEBA Engineering Inc. He has extensive experience in substation design, power system studies, power quality audits, EMF and grounding design, field testing and EHS program settings.

Khaled received his M.Sc. from The University of New Brunswick and his MBA from Laurier School of Business. He has managed and executed various electrical engineering projects for major electrical, industrial and commercial facilities in Canada and the US.

He has various IEEE publications, is a technical reviewer for many IEEE journals and is a certified electrical safety trainer for GE. Khaled has been the recipient of GE Management Award and has many leadership certifications from GE Leadership Development Centre at Crotonville.

As a certified electrical safety trainer by GE Corporate, Khaled has taught many technical courses across Canada, USA, Asia and Middle East to industrial customers, electrical consultants and electrical utilities customers.



Venue

To be announced

Although the venue is not officially confirmed, EPIC courses are generally held at the following location(s):

Executive Hotel Vancouver Airport
7311 Westminster Hwy
Richmond BC  V6X 1A3

Radisson Hotel Vancouver Airport, Pacific Reach Hotel OP (Richmond LP)
8181 Cambie Road
Richmond Vancouver BC  V6X 3X9

Hilton Vancouver Airport
5911 Minoru Blvd
Richmond BC  V6X 4C7

Please confirm with EPIC that the venue has been officially confirmed before making any reservations or travel arrangements.

REGISTER NOW
NOT INTERESTED IN THIS COURSE?

We always want to improve the quality of our courses. Please select any reasons why you feel this course is inadequate (check all that apply).

Please check this box:
Course Rating
4.0 out of 5

Overall rating of this course by its previous attendees!

Fee & Credits

$1995 + taxes

  • 2.1 Continuing Education Units (CEUs)
  • 21 Professional Development Hours (PDHs)
  • ECAA Annual Professional Development Points
Register




Canada Job Grant
The cost of this course could be covered by Canada Job Grant.

Your company may be eligible for funding! LEARN MORE
On-Site Training
This course can be customized and delivered to your group of staff at your facility, saving time and money.
REQUEST A QUOTE
E-Newsletter
EPIC's email newsletter is a great source of information for:

  • course updates
  • surveys
  • informative articles/papers
  • exclusive discounts
Subscribe
Top