Evaluation and Rehabilitation of Pavements
Jan 30 - 31, 2019 /
Course Code: 09-0108-2362
After participating in the course, you will be able to:
- Design new pavements using the AASHTO 1993 Guide for the Design of Pavements
- Have a basic understanding of the new mechanistic-empirical pavement design procedure
- Understand and know when to use non-destructive testing for pavement evaluation
- Apply management techniques to improve the life-cycle and reduce the cost of pavements
- Design and maintain permeable pavements for water quality improvement and quantity management
- Use maintenance and rehabilitation methods to extend the useful life of pavements
- Manage pavements and sidewalks efficiently with insight into pavement defects, their causes and repair
Cost effective pavement management is a result of careful design, quality construction and timely maintenance. Agencies are faced with the challenge of maintaining the significant public investment in transportation infrastructure. Although new materials and methods are being added to the roadway manager’s repertoire, they must accommodate increasing loads while continually fighting a challenging battle against deterioration.
This course examines practical techniques for the evaluation of asset condition and provides preventive maintenance and rehabilitation methods and materials to cost-effectively extend the service life of transportation assets. Learning will be further enhanced through presentations of case study examples.
- Factors that affect pavement performance
- Pavement design
- Pavement rehabilitation design
- Pavement management
- Life-cycle costing
- Preventive maintenance
- Rehabilitation and maintenance methods
- Pavement technology developments
- Examples of poor and best practices for roads and sidewalks
Who Should Attend:
Project Engineers and Managers • Municipal Engineers • Operations Maintenance Engineers Construction and Design Engineers • Contractors • Consultants
8:00 Registration and Coffee (Day I only)
8:15 Session begins
12:00 Lunch (provided)
There will be a one-hour lunch break in addition to a refreshment and networking break during each morning and afternoon session.
Welcome, Introduction, Workshop Preview, Learning Outcomes and the Assessment Method
Course Overview and Preview of the Day
Factors that Affect Pavement Performance
- History of pavement design in Canada
- Function of a pavement
- Factors that impact pavement performance: traffic, soils and materials, environment
- AASHTO 1993: flexible pavement design, rigid pavement design, interlocking concrete block pavement design
- Highlights of the new AASHTO Pavement ME Design mechanistic-empirical design procedure
- Surface condition evaluation
- Structural capacity
- Developing alternatives for pavement rehabilitation
- Pavement performance evaluation
- Systematic maintenance programs
- Performance modelling
- Prioritization and optimization
- What is the best pavement type for your application?
- Asphalt concrete
- Exposed concrete
- Interlocking concrete block
- Surface treatment/seal cost
- Life-cycle costing examples
Permeable Pavement Design and Maintenance
Review of Day I and Preview of the Second Day
Pavement Rehabilitation and Maintenance Management
- Timely preventive maintenance
- Priority planning and programming
- Roadway drainage
- Utility Repairs
- Crack sealing
Rehabilitation and Maintenance Methodologies
- Thin surface treatments
- Surface texturization
- Recycling techniques
Recent Developments in Pavement Technology and Specifications
- Paving practices
- Construction management
- Warm Mix Asphalt
Sidewalk and Recreational Trail Design Practices and Management
The lecturer will provide examples of various pavement distresses and conditions for roads and sidewalks and you will discuss what the best method of repairing or upgrading the pavements.
Questions and Answers and Feedback to Participants on Achievement of Learning Outcomes
Dave is a principal engineer with ARA Transportation & has over 30 years of experience in the design, evaluation, and management of pavements. He has developed and completed numerous pavement design and management courses for government and private sector agencies.
A regular technical contributor to technical conferences worldwide, Mr. Hein is past chair of multiple engineering committees for the Transportation Association of Canada, FWD Users Group, American Society of Civil Engineers and the World Road Association.
To be announced
Although the venue is not officially confirmed, EPIC courses are generally held at the following location(s):
Radisson Hotel Winnipeg
288 Portage Avenue
Winnipeg MB R3C 0B8
Hilton Winnipeg Airport Suites
1800 Wellington Avenue
Winnipeg MB R3H 1B2
Please confirm with EPIC that the venue has been officially confirmed before making any reservations or travel arrangements.
NOT INTERESTED IN THIS COURSE?
We always want to improve the quality of our courses. Please select any reasons why you feel this course is inadequate (check all that apply).
Overall rating of this course by its previous attendees!
Fee & Credits
- 1.4 Continuing Education Units (CEUs)
- 14 Professional Development Hours (PDHs)
$1695 + taxesFee after December 21, 2018:
$1795 + taxesRegister
REQUEST A QUOTE
- course updates
- informative articles/papers
- exclusive discounts