TRAINING.

Welding Design and Metal Fatigue for Structural Engineers

Calgary, Alberta /
Jun 10 - 11, 2019 /
Course Code: 09-0302-2362

REGISTER NOW
The confirmation of a course and venue depends on early registration; Register early to avoid the postponement or cancellation of a course.
  • Overview
  • Syllabus
  • Instructor
  • Location

Overview

After participating in this course you will be able to do the following:

  • Analyze joints using fundamental knowledge of various material strengths
  • Design welded joints using basic weld design principles
  • Prevent failures by using knowledge of metal fatigue
  • Apply the fundamentals of welded joints in structures

Description
Welding provides architects and engineers with an economical technique for complete freedom in structural design and development. The widespread recognition of welding as a safe means of making structural connections has come about only after years of diligent efforts and heavy documentation of research findings and successes.

This course will discuss the different welding techniques used in the structural engineering fields, residual stresses, and how to minimize weld distortion. It will also focus on the means of achieving safe designs for welded structural connections, providing participants with the necessary skills to ensure the long-term safety of their structures. Issues of static load and fatigue will be discussed, along with possible design improvements.

Course Outline:

  • Introduction to Welded Construction
  • Welding Process
  • Performance of Welded Structures under Static Loading
  • Welded Joint Design
  • Residual Stress and Distortion
  • Ways to Minimize Distortion and Prevent Weld Failures
  • Performance of Welded Structures under Fatigue Loading
  • Welded Design Improvements
  • Workshop

Who Should Attend:
Fabricators and Engineers who are involved in the design and assessment of welded structures • Engineers who are involved in the Fatigue Analysis of Structures Subjected to Repeated Loading • Structural Consulting Engineers • Project Managers • Construction Engineers.

More Information

Syllabus

Daily Schedule
8:00 Registration & Coffee (Day 1 only)
8:30 Seminar begins
12:00 Lunch (provided)
4:30 Adjournment

There is an one‐hour lunch break each day in addition to a refreshments and networking break each morning and afternoon. Lunch and refreshments are provided.

Day I

Welcome, Introduction, Workshop Preview, Learning Outcomes, and Assessment Method

Design of Welded Structures: Overview of the Course

  • Introduction to welded construction
  • Fundamentals of strength of materials
  • Welded joint design
  • Metal fatigue
  • Welded design improvements
  • Workshop

Introduction to Welded Construction

  • Welding importance to structural field
  • Why welded construction
  • How good is a weld
  • Weld quality and inspection
  • Design for welding
  • Weldability and welding procedures
  • Welding symbols
  • Weld layout

Fundamentals of Strength of Materials

  • Tensile, compressive, and shear properties of materials
  • Engineering stress-strain properties
  • True stress-strain properties
  • Hardness testing, correlations and conventions

Performance of Welded Structures

Behavior Under Static Loading (Welded Joint Design)

  • Types of welds
  • Types of welded joints
  • Static design of welded joints

Workshop

Participants work on hands-on exercises under the instructor’s guidance on both days. Workshop exercises include the following topics:

  • Design of welded joints under static loading
  • Fatigue damage calculations
  • Design of welded joints against fatigue failure

Day II

Performance of Welded Structures

Behavior Under Repeated Loading (Metal Fatigue)

  • Loading spectrum
  • Cycle counting technique
  • Fatigue properties
  • Stress-life and strain-life approaches in fatigue analysis
  • Mean stress effect
  • Notch geometry effect
  • Potential modes of fatigue failures in welded structures
  • Fatigue of welded joints

Welded Design Improvements

  • General guidelines
  • Recommendations

Workshop

Participants work on hands-on exercises under the instructor’s guidance on both days. Workshop exercises include the following topics:

  • Design of welded joints under static loading
  • Fatigue damage calculations
  • Design of welded joints against fatigue failure

Questions and Answers, and Feedback on Achievement of Learning Outcomes

Instructor

Ashraf Dabayeh, M.A.Sc., Ph.D.

Ashraf Dabayeh, M.A.Sc., Ph.D.

Ashraf is currently a section chief of structures with Bombardier Aerospace.

Dr. Dabayeh received his M.A.Sc. and PhD from the University of Waterloo, specializing in fatigue and crack growth analysis of metallic materials, structural analysis and design of steel structures, stress analysis using the finite element method, multiple-site damage analysis, and composite and metallic repairs of aging aircraft materials. With over fourteen years of work experience with IMP Aerospace, L-3 Communications, and Bombardier Aerospace, he has been involved in the design and repair of metallic structures in the aerospace and automotive industries. The author of several scientific publications, Dr. Dabayeh has delivered papers at different North American and European scientific conferences on topics related to fatigue and fracture mechanics of metallic and composite structures. He has also contributed to scientific textbooks in the same field.



Venue

To be announced

Although the venue is not officially confirmed, EPIC courses are generally held at the following location(s):

Hilton Garden Inn Calgary Airport
2335 Pegasus Rd NE
Calgary AB  T2E 8C3

Radisson Hotel & Conference Centre Calgary Airport
6620 36th ST NE
Calgary AB  T3J 4C8

Please confirm with EPIC that the venue has been officially confirmed before making any reservations or travel arrangements.

REGISTER NOW
NOT INTERESTED IN THIS COURSE?

We always want to improve the quality of our courses. Please select any reasons why you feel this course is inadequate (check all that apply).

Please check this box:
Course Rating
4.4 out of 5

Overall rating of this course by its previous attendees!

Fee & Credits
  • 1.4 Continuing Education Units (CEUs)
  • 14 Professional Development Hours (PDHs)
Early Registration Fee:

$1495 + taxes

Fee after May 3, 2019:

$1595 + taxes

Register




On-Site Training
This course can be customized and delivered to your group of staff at your facility, saving time and money.
REQUEST A QUOTE
OTHER LOCATIONS
Welding Design and Metal Fatigue for Structural Engineers   Mississauga, ON | Oct 28 - 29, 2019
E-Newsletter
EPIC's email newsletter is a great source of information for:

  • course updates
  • surveys
  • informative articles/papers
  • exclusive discounts
Subscribe
Top