TRAINING.

Testing, Commissioning and Maintenance of Electrical Systems

Edmonton, Alberta /
Sep 23 - 26, 2019 /
Course Code: 10-0921-2370

REGISTER NOW
The confirmation of a course and venue depends on early registration; Register early to avoid the postponement or cancellation of a course.
  • Overview
  • Syllabus
  • Instructor
  • Location

Overview

After participating in this course, you will be able to:

  • Describe how to plan, control and implement commissioning of electrical systems
  • Discuss the performance specifications, which can be economically verified
  • Pick out the field tests for electrical distribution systems, generator and motors, transformers, switchgear and cables
  • Select among corrective, preventive and preventive maintenance for your electric power distribution system
  • Explain the AC and DC testing of electrical equipment and specify the handover, acceptance and transition to operations

Description
This course provides guidelines to anyone who wishes to know and understand the role of commissioning in a project, whatever its size. The importance of planning and preparation for the project, from engineering to commissioning and start up, will be emphasized. This course deals with safety considerations in maintenance and testing procedures for all the components of any electrical system. It also discusses field testing of all the major components of an electrical system such as motors, generators, switchgear, protection and control, UPS and battery systems.

Course Outline:

  • AC and DC voltage testing techniques
  • Testing of motors and generators
  • Transformers and switchgear
  • Cables and accessories
  • Battery system and protective relay system
  • Power distribution system maintenance
  • Grounding, ground resistance measurement
  • Insulating oils, fluids and gases
  • Electrical safety and precautions
  • Overview of commissioning

Who Should Attend
Design Engineers Electrical Engineers Commissioning and Testing Engineers Consulting Engineers Electrical Technologists Project Managers Project Engineers Plant Managers Operating and Maintenance Personnel

More Information

Syllabus

Daily Schedule
8:00 Registration & Coffee (Day 1 only)
8:30 Seminar begins
12:00 Lunch (provided)
4:30 Adjournment

There is a one-hour lunch break each day in addition to a refreshments and networking break each morning and afternoon. Lunch and refreshments are provided.

Day I

Welcome, Introduction, Workshop Preview, Learning Outcomes and the Assessment Method

Overview of Field Test Requirements

  • Development of test regime
  • Outline of typical tests
  • Interpretation of test results
  • Troubleshooting

Basic Electrical Theory

  • DC circuits basics
  • AC circuit laws
  • Impedance and power factor
  • Bridge methods

DC Voltage Testing Techniques

  • Insulation resistance tests
  • Step voltage and high voltage tests
  • Testing power factor correcting capacitors

AC Voltage Testing Techniques

  • Power factor and dissipation factor tests
  • AC high potential test
  • Safety precautions

Insulating Oils, Fluids and Gases

  • Deterioration of oil
  • Oil testing and analysis
  • interpretation of test values
  • Reconditioning used oil
  • Insulating gases

Transformers

  • Polarity, terminal markings and connections
  • Dry type transformers: inspection, and acceptance tests
  • Liquid type transformer: inspection, and acceptance tests
  • Routine testing: AC high potential testing, TTR test, polarity test, induced potential test, polarization recovery voltage test, and DC winding resistance tests

DAY II

Testing of Motors and Generators

  • Insulation resistance
  • High potential test
  • Power factor test
  • Dissipation factor
  • Voltage surge comparison testing

Lightning Protection

  • Testing and commissioning of lightning arrestors and over-voltage arrestors

Switchgear

  • Insulation resistance measurement test
  • DC or AC high potential testing
  • Power factor or dielectric loss test
  • Circuit breaker contact resistance test

Cables and Accessories

  • Insulation resistance measurement test
  • DC over potential testing
  • Voltage versus leakage current
  • Power factor test
  • Cable fault locating

Battery System

  • Tests for acceptance
  • Performance
  • Service
  • Connection resistance
  • Impedance tests

DAY III

Protective Relay Systems

  • Classifications of current transformers
  • CT accuracy classes (metering, relaying)
  • Testing instrument transformers (CT, VT)
  • Testing protective relays

Power System Grounding and Ground Resistance Measurement

  • Solidly grounded, ungrounded and resistance grounded systems
  • Grounding electrodes
  • Factors affecting soil resistivity
  • Methods of ground resistance measurement

Power Quality and Harmonics Monitoring

  • Effects of harmonics on equipment
  • Power quality measurement
  • Recognizing power quality issues
  • Mitigating PQ effects and optimizing energy use
  • Stand by diesel generators and transfer systems

Day IV

Power Distribution System Maintenance

  • Types of maintenance (corrective, preventive and predictive)
  • Canadian Code requirements

Selling Management on the Need for Preventive and Predictive Maintenance Program

Electrical Safety, Arc flash Hazard, Switching Practices and Precautions

  • Lock out and tag out
  • Personal protective equipment
  • Safety grounds

Overview of Commissioning

  • Terminology
  • Objectives
  • Specifications
  • Development of procedures, forms and documentation
  • Interpretation of results

Case Study on Commissioning and Testing

Questions and Answers and Feedback to Participants on Achievement of Learning Outcomes

Instructor

Khaled Akida, P.Eng., MBA, M.Sc.

Khaled is a registered professional engineer and general manager of TEEBA Engineering Inc. He has extensive experience in substation design, power system studies, power quality audits, EMF and grounding design, field testing and EHS program settings.

Khaled received his M.Sc. from The University of New Brunswick and his MBA from Laurier School of Business. He has managed and executed various electrical engineering projects for major electrical, industrial and commercial facilities in Canada and the US.

He has various IEEE publications, is a technical reviewer for many IEEE journals and is a certified electrical safety trainer for GE. Khaled has been the recipient of GE Management Award and has many leadership certifications from GE Leadership Development Centre at Crotonville.

As a certified electrical safety trainer by GE Corporate, Khaled has taught many technical courses across Canada, USA, Asia and Middle East to industrial customers, electrical consultants and electrical utilities customers.



Venue

To be announced

Although the venue is not officially confirmed, EPIC courses are generally held at the following location(s):

Radisson Hotel Edmonton South
4440 Gateway Blvd.
Edmonton AB  T6H 5C2

Please confirm with EPIC that the venue has been officially confirmed before making any reservations or travel arrangements.

REGISTER NOW
NOT INTERESTED IN THIS COURSE?

We always want to improve the quality of our courses. Please select any reasons why you feel this course is inadequate (check all that apply).

Please check this box:
Course Rating
4.6 out of 5

Overall rating of this course by its previous attendees!

Fee & Credits
Early Registration Fee:

$2595 + taxes

Fee after August 16, 2019:

$2995 + taxes

  • 2.8 Continuing Education Units (CEUs)
  • 28 Professional Development Hours (PDHs)
  • EPIC courses qualify for ECAA Annual Professional Development Points
Register




On-Site Training
This course can be customized and delivered to your group of staff at your facility, saving time and money.
REQUEST A QUOTE
E-Newsletter
EPIC's email newsletter is a great source of information for:

  • course updates
  • surveys
  • informative articles/papers
  • exclusive discounts
Subscribe
Top