Design and Construction of Interlocking Concrete Pavements for Municipal Streets and Roadways
Apr 1, 2021 /
Course Code: 0402-WEB21
- Be able to recognize and use current common pavement design procedures.
- Understand common design and construction features important to the performance of both asphalt and concrete pavements.
- To design and recognize specification and construction activities that can improve the performance of pavements.
- Communicate and promote good road design and construction practices.
Purpose and Background
One of the most valuable and used physical assets in North America are our pavements. Roads, highways, airports and parking facilities serve to support the movement of goods and people for both business and recreational purposes. These assets impact the daily life of almost everyone. The peak of road building in North America was during the 1960s and 70s. The focus was to provide safe, durable and accessible vehicular transportation for everyone. Since that time, our focus has been mostly on the maintenance and rehabilitation of this valuable infrastructure. Unfortunately, demand has exceeded our capability to maintain our roadway infrastructure.
An alternative to the traditional flexible and rigid pavements that we commonly used in North America, are semi-rigid pavements. The most common semi-rigid pavements include, natural stone, interlocking concrete and clay brick pavements. The use of these types of pavement were common through the 1800s and 1900s in North America but fell out of favor with the sub-urbanization of our major cities. Stone and brick pavements were overlaid with asphalt concrete in the downtown areas of older cities.
Semi-rigid pavements have many advantages over asphalt and concrete pavements. They are very commonly used for ports and intermodal terminals as they offer the ability to accommodate vertical and horizontal shear movements without serious damage, can be removed and replaced to access underground utilities at minimal cost, provide a long term sustainable pavement and offer overall life-cycle cost advantages. Semi-rigid pavements are very durable and if installed correctly have very few maintenance needs. European cities and towns use more than 10 times as much semi-rigid pavements compared to conventional pavements in their urban areas compared to agencies in North America. Their appearance also aesthetically pleasing compared to conventional pavements.
The purpose of this webinar is to develop an understanding of the key features of design, construction, maintenance and rehabilitation to assist agencies and other owners to ensure that they are getting what they paid for and to cost-effectively extend the service life of our pavement infrastructure.
The primary discussion topics of this webinar include:
- Basics of semi-rigid pavement design
- Design of semi-rigid pavement using ASCE Standard Guideline 58-17.
- Key design features to ensure pavement longevity
- Construction techniques improve performance
- Maintenance and rehabilitation planning and execution
- Understand methods to cost-effectively design, construct and maintain semi-rigid pavements
- Understand the importance of key design features
- Specify semi-rigid pavements
- Recognize construction deficiencies and their impact
- Plan effective maintenance and rehabilitation treatments
- Optimize pavement investments
Who Should Attend
- Engineers involved in the design, evaluation and management of pavements
- Roadway agencies
- Personnel involved in the design or management of transportation assets
Please note: You can check other time zones here.
David Hein, P.Eng. is a consulting Civil Engineer with over 35 years of experience in the design, evaluation and management of transportation infrastructure. He recently retired from Applied Research Associates, Inc. of Toronto, Ontario. He is the past president of the American Society of Civil Engineers Transportation and Development Institute (ASCE T&DI), chair of the Workforce Development Council and chair of 5 engineering standards committees.
He is a long term member of the Transportation Association of Canada (TAC), Past-Chair of the pavements committee and member of the Workforce Development Council and past members of the Transportation Research Board pavement management, pavement maintenance and pavement preservation committees. He has represented Canada on the World Road Association (WRA) pavements and asset management committees since 2002 and is currently the Vice-Chair of the Canadian National Committee to the WRA. He also recently stepped down after 10 years as Executive Director of the Falling Weight Deflectometer User Group.
He has been involved in numerous national and international research, evaluation and asset management projects for Federal, State, Provincial and Municipal agencies and many of the public/private/ partnership highway construction projects across Canada and the United States.
NOT INTERESTED IN THIS COURSE?
We always want to improve the quality of our courses. Please select any reasons why you feel this course is inadequate (check all that apply).
Overall rating of this course by its previous attendees!
Fee & Credits
$175 + taxes
- 0.1 Continuing Education Units (CEUs)
- 1 Professional Development Hours (PDHs)
- ECAA Annual Professional Development Points
Canada Job Grant
Your company may be eligible for funding! LEARN MORE
REQUEST A QUOTE
- course updates
- informative articles/papers
- exclusive discounts