Geotechnical Aspects of Pavements
Mar 9 - 10, 2022 /
Course Code: 0314-ONL22
This course is held online over 2 days on the following schedule (All times in Eastern Time Zone):
9:30 am to 5:30 pm Eastern Time
After participating in this course, you will be able to do the following:
- Identify challenges associated with the design and construction of modern pavement systems;
- Assess the geotechnical inputs needed for the design of pavements;
- Evaluate and select appropriate remediation measures for pavement subgrades;
- Develop alternatives for addressing subgrade problems during design and construction; and,
- Complete the design procedures of an asphalt pavement system.
The course covers the latest methods and procedures to address the geotechnical issues in pavement design, construction, and performance. These methods can be applied to new construction, reconstruction and pavement rehabilitation projects. The content includes geotechnical assessment, testing and characterization of in-place and constructed subgrades, as well as designing and constructing pavement subgrades and unbounded materials for paved roads. The course is designed to cover the elements of the empirical and mechanistic-empirical design approaches. It will cover asphalt pavements including granular layers and HMA mixes, specifications, and main aspects of construction.
Part I: Geotechnical Engineering for Pavement Engineers
- Water and Soils
- Consolidation and Settlement
- Strength and Stiffness
- Ground Improvement and Applications
Part II: Pavement Engineering
- Pavement Investigation
- Subgrade and Granular Layers in Pavement Structure
- Hot-Mix Asphalt Mixes
- Pavement Design and Performance
Who Should Attend:
Civil Engineers • Managers • Owners of Highways • Ministry of Transportation Personnel • Pavement Design Engineers • Transit System Engineers • Infrastructure Project Managers • Geotechnical Engineers • Consulting Engineers • Specification Writers • Quality Assurance Managers • Construction Engineers • Technicians and TechnologistsMore Information
Time: 9:30 AM - 5:30 PM Eastern Time
Please note: You can check other time zones here.
9:30 Session begins
There will be a one-hour lunch break each day in addition to refreshment and networking breaks during the morning and afternoon.
Part 1 - Geotechnical Engineering for Pavement Engineers
Soil types, mass-volume relationships, grain size distribution, index properties, USCS/AASHTO classification, total vs. effective stress, load distribution
Water and Soils
Capillarity, shrinkage/swelling, freeze-thaw, frost heave, permeability/hydraulic conductivity, seepage flow (one- and two-dimensional), constant and falling head tests
Consolidation and Settlement
Components of settlement, time-rate, laboratory consolidation (oedometer) tests, compressibility characteristics, preconsolidation pressure, over-consolidation ratio, secondary consolidation (creep)
Strength and Stiffness of Soils
Cohesive/frictional components of shear strength, undrained vs. drained strength, field and laboratory testing, repeated loading effects, modulus and resilient modulus
Deep vs. shallow methods, stabilization, geosynthetics, compaction, equipment and procedures
Embankments, excavations, dewatering/drainage
Part 2 - Pavement Engineering
Geotechnical investigation, visual inspection, drainage, laboratory testing, nondestructive testing
Subgrade and Granular Layers in Pavement Structure
Requirements for subgrade, testing including CBR and Falling Weight Deflectometer (FWD), compaction requirements, standard and modified Proctor tests; granular layers - objectives, material types, granular base and subbase
Asphalt cement (AC) - performance grading testing, advanced testing (MSCR, DENT, Ash, Extended BBR); compatibility of AC and aggregates, stripping; other HMA materials, characteristics; HMA mix design methodologies - Marshall and Superpave - basics, volumetrics, procedures
Pavement Design and Performance
Empirical and mechanistic-empirical including AASHTO MEPDG; concept of Equivalent Single Axle Loads (ESAL); inputs - subgrade soil, traffic, climate, materials, other; design analysis and performance models and analysis; specifications; importance of drainage
Introduction; subgrade preparation, granular layers, HMA production, delivery and placement, joint construction; Quality Control/Quality Assurance testing and acceptance
Questions and Answers, Feedback on Achievement of Learning Outcomes
Concluding Remarks and Final Adjournment
InstructorPaul Dittrich, Ph.D., P.Eng
Paul Dittrich, Ph.D., P.Eng. is a Senior Geotechnical Engineer and a Principal of Golder Associates Ltd. with over 20 years of experience on a variety of local and international projects in the transportation, infrastructure, mining and heavy industry fields.
He has experience with many aspects of geotechnical engineering and is the technical supervisor of specialized laboratory and in situ geotechnical testing services in Golder’s Mississauga office. His main areas of expertise include site characterization, foundation design, settlement analysis, stability of slopes, embankments and excavations, specialized geotechnical analysis/modelling (including staged construction analysis), geotechnical monitoring and ground improvement.
Ludomir Uzarowski, P.Eng., Ph.D.
Ludomir Uzarowski, Ph.D., P.Eng. is a Senior Pavement and Materials Engineer and a Principal of Golder Associates Ltd. with over 40 years of experience on a variety of local and international road and airport projects.
He has extensive experience with many aspects of pavement and materials technology. Ludomir oversees two laboratories providing soil, granular materials, asphalt cement and asphalt mixes and concrete testing services in Golder’s Whitby and Cambridge offices. His areas of expertise include pavement investigation including nondestructive testing, pavement materials field and laboratory testing, pavement designs, paving specifications review and development, construction including Quality Control/Quality Assurance, pavement management, performance, maintenance and preventive treatments.
Dr. Uzarowski is an Adjunct Professor at the University of Waterloo, Department of Civil and Environmental Engineering.
NOT INTERESTED IN THIS COURSE?
We always want to improve the quality of our courses. Please select any reasons why you feel this course is inadequate (check all that apply).
Overall rating of this course by its previous attendees!
Fee & Credits
$1295 + taxes
- 1.4 Continuing Education Units (CEUs)
- 14 Professional Development Hours (PDHs)
- ECAA Annual Professional Development Points
OTHER UPCOMING DATES
REQUEST A QUOTE
Canada Job Grant
Your company may be eligible for funding! LEARN MORE