TRAINING.

Electrical Engineering Fundamentals for Non-Electrical Engineers

Online /
July 8, 12 2022 /
Course Code: 0708-WEB22

REGISTER NOW
The confirmation of this course depends on early registration; Register early to avoid the postponement or cancellation of a course.
  • Overview
  • Syllabus
  • Instructor

Overview

Learning Objectives and Take-Aways

  1. After attending this course, you will know the principles and concepts associated with AC and DC electricity, and the distinction between these two realms of electricity. This understanding can be used to apply appropriate mathematics and physics premised techniques, principles and equations for analysing AC and DC systems, in electronics and electrical power domains.
  1. You will know the role played by voltage and current angles in the determination of power factor. The science and engineering theory behind power factor is illustrated using the vector method, graphical representation of voltage and current as a function of time and angle. Participants learn to apply different methods for calculating leading and lagging power factors.
  1. You will understand how addition of power factor correcting capacitors results in improvement of power factors and the physics and engineering based explanation behind “addition of too much capacitance,” and how to avoid it.
  1. You will be able to apply important electrical system concepts, such as, power quality, load factor and service factor, demand, peak demand, distinction between electrical energy and electrical power, and associated engineering computation formulas and methods.
  1. You will know the difference between three-phase AC, “Y” and “∆ - Delta” configuration of loads and sources, and know the significance of these configurations from practical power distribution and application perspective.
  1. You gainfamiliarity with power distribution equipment and instrumentation.
  1. You will understand the role Electrical Code plays in the realm of electrical design, electrical safety and arc flash hazard.
  1. You will learn how to interpret electrical one-line and comprehensive wiring diagrams.
  1. You will understand how electrical power bills are calculated under large industrial and commercial contract scenarios, and take away some tips on electrical cost reduction.

Course description

This seminar or course covers principles of electricity in a simple, easy to understand, format. It is themed after a book published by the instructor, titled: “Electrical Engineering for non-Electrical Engineers.” In the book, as well as this seminar, Rauf uses simple analogies and practical, day to day, examples to illustrate the, otherwise, abstract concepts of electrical engineering. Upon attending this course, participants will be able to perform straightforward and common calculations associated with voltage, current, resistance, circuit analysis, DC, single phase AC, three phase AC, power, power factor, service factor, load factor, and much more. Practical examples of electrical equipment applications, in industrial, commercial and institutional settings are covered. Discussions on electrical equipment, components, safety electronic devices, and test instrumentation are included. Important concepts in electrical safety are introduced. This course is designed for engineers, professional engineers, energy professionals, engineering managers, technical professionals, facilities managers and other professionals who are not intimately familiar or current on electrical engineering principles and practices. Participants are kept engaged through questions and answers, discussions and classwork.

Course Outline:

  • Electrical Engineering Fundamentals
  • Differences between DC and AC electricity, equipment, devices, and concepts
  • DC Power and AC Power and pertinent, important, single-phase and three-phase AC Concepts
  • Common Electrical Instruments
  • Important laws and circuit analyses techniques, DC and AC
  • Transformers and 3-phase AC electricity
  • Voltage regulation and service factor
  • Electrical standards
  • Motors, motor speed, torque, slip, and line current calculation
  • Electronics, elemental electronic devices and printed circuit boards
  • Power factor and power factor correction
  • Electrical Equipment and Instrumentation in Industrial Applications
  • VFD’s, their architecture and their application.
  • Electrical Power System Protection and Pertinent Codes
  • Electronic and electrical safety control devices/equipment
  • Electrical Power Distribution and Control Drawings
  • Electrical Power Bills, Rate Schedules and Cost Reduction Ideas

Who Should Attend?

  • Licensed Professional Engineers, who need to meet the annual or biennial license renewal PDH (Professional Development Hour) or CEU (Continuing Education Units) requirements.
  • Engineersand Architects, in all disciplines, who do not possess current working knowledge of electrical power and controls concepts, and respective technologies.
  • Engineering Managers/Directors
  • Project Managers
  • Facility Managers, Engineering Managers, Program/Project Managers and other executives or leaders who feel a lack of adequate electrical power and controls knowledge to hold meaningful discussions and to make informed decisions with interacting with their power and controls subordinates or colleagues
  • Non-engineers, including technical writers responsible for developing operations and maintenance manuals for electrical or controls equipment
  • Procurement/purchasing professionals who are responsible for acquisition of power and controls equipment
  • Construction Site Superintendents
  • Constructions Company Managers/Executives
  • Maintenance Engineers and Maintenance Managers
  • Other professionals who’s annual PLP, Performance and Learning Program, includes engineering/technical courses/seminars/workshops.
More Information

Time: 11:00 AM - 3:00 PM Eastern Time


Please note: You can check other time zones here.

System Requirements

PC-based attendees
OS: Windows 7, 8, 10 or newer

Browser:
IE 11 or later, Edge 12 or later, Firefox 27 or later, Chrome 30 or later

Macintosh based attendees
OS: Mac OS X with MacOS 10.7 or later

Browser:
Safari 7+, Firefox 27+, Chrome 30+

iOS
OS: iOS 8 or newer

Android
OS: Android 4.0 or higher

Syllabus

Day 1, 4-hours:

  • Electrical Engineering Fundamentals
  • Differences between DC and AC electricity, equipment, devices, and concepts
  • DC Power and AC Power and pertinent, important, single-phase and three-phase AC Concepts
  • Common Electrical Instruments
  • Important laws and circuit analyses techniques, DC and AC
  • Transformers & 3-phase AC electricity
  • Voltage regulation and service factor

Day 2, 4-hours:

  • Electrical standards
  • Motors, motor speed, torque, slip, and line current calculation
  • Electronics, elemental electronic devices and printed circuit boards
  • Power factor and power factor correction
  • Electrical Equipment and Instrumentation in Industrial Applications
  • VFD’s, their architecture and their application.
  • Electrical Power System Protection and Pertinent Codes
  • Electronic and electrical safety control devices/equipment
  • Electrical Power Distribution & Control Drawings
  • Electrical Power Bills, Rate Schedules and Cost Reduction Ideas

Instructor

S. Bobby Rauf, BSEE, P.E., C.E.M, MBA

Professor Bobby Rauf has developed and instructed engineering courses, seminars and workshops for over 14 years, in the US and abroad.

He holds a patent on an electrical control system. Mr. Rauf has authored three books titled: Finance and Accounting for Energy Engineers, Thermodynamics Made Simple for Energy Engineers, and Electrical Engineering for Non-Electrical Engineers. Mr. Rauf served as a Senior Staff Engineer, Energy and Ergonomics Program Manager, at PPG Industries, Inc, for over 30 years. He has served as Adjunct Professor at Gardner-Webb University since 1989 and has taught Professional Development Seminars/workshops at UNCC, McNeese University, Texas A&M University, Lamar University, AEE, Association of Energy Engineers, Balfour Beatty, Saudi Aramco and PDHengineers.

Prof. Rauf is a Licensed (PE) Professional Engineer and a Certified Energy Manager. He was inducted as “Legend in Energy” by AEE, in 2014.




The Engineering Institute of Canada EPP Approved   
REGISTER NOW
NOT INTERESTED IN THIS COURSE?

We always want to improve the quality of our courses. Please select any reasons why you feel this course is inadequate (check all that apply).

Please check this box:
Course Rating
4.0 out of 5

Overall rating of this course by its previous attendees!

Fee & Credits

$595 + taxes

  • 0.8 Continuing Education Units (CEUs)
  • 8 Professional Development Hours (PDHs)
  • ECAA Annual Professional Development Points
Register




OTHER UPCOMING DATES
______________________________

Electrical Engineering for Non-Electrical Engineers   Online | Jan 31 - Feb 2, 2023
Group Training
This course can be customized and delivered to your group of staff at your facility, saving time and money.
REQUEST A QUOTE
Sign-up for our newsletter
Canada Job Grant
The cost of this course could be covered by Canada Job Grant.

Your company may be eligible for funding! LEARN MORE
Top