TRAINING.

Electrical Overhead and Underground Distribution Systems

Online /
Sep 13 - 17, 2021 /
Course Code: 12-0905-ONL21

REGISTER NOW
  • Overview
  • Syllabus
  • Instructor

Overview

Please note, This instructor-led course has specific dates and times:
This course is held online over 5 days on the following schedule (All times in Eastern Time Zone):

9:30 am to 5:30 pm Eastern

After participating in this course, you will be able to do the following:

  • Identify all the components of a distribution system
  • Describe customer service policy issues, industry standards, and accepted practices
  • Apply the correct standards and codes to the different zones of power distribution systems
  • Select the appropriate overhead and underground distribution system components
  • implement the latest national and international standards for distribution system components

Description:
The course covers the special knowledge and skills needed for the efficient implementation of safe and economical electrical distribution projects. Through interaction with your instructor and fellow participants, you will learn about planning and design considerations, overhead conductors, structure types and loading, fault protection coordination, arc flash, system grounding and electrical and mechanical characteristics of cables.

Topics also covered include designs and ratings of distribution transformers, capacitors ratings and types, protection in distribution systems, and distributed generation. Your learning experience will include group discussions of specific situations.

Course Outline:

  • General Planning and Design Considerations
  • Substation Components
  • Conductors
  • Cable Construction, Standards and Specifications
  • Pole Structure, Type, and Design
  • Power Systems Studies
  • Arc Flash
  • Grounding and Distributed Generation
  • Capacitors
  • Electrical vehicles charging and CEC Rules

Who Should Attend:
Utility Engineers • Consulting Engineers • Project Managers • Engineers • Technicians • Contractors • Inspectors • Safety Personnel • Supervisors • Manufacturers

Special Features:

  • Valuable reference materials
  • Practical experience solving numerical problems
  • Daily question and answer periods
More Information

Time: 9:30 AM - 5:30 PM Eastern Time


Please note: You can check other time zones here.

Syllabus

Day I

General Planning and Design Considerations

  • Electric power system and power distribution
  • Nominal voltage levels
  • Applicable codes, policies, and standards (IEEE, CSA, CEC)
  • Main stages of the design process
  • Reliability of electric power supply
  • Economic considerations
  • Power loading (normal and contingency)
  • Operations and maintenance considerations
  • Aesthetics
  • Route selection and rights-of-way
  • Joint use

Substation Components

  • Substation Types
  • Design, Construction, and Commissioning
  • Substation Diagrams
  • Bus Arrangement
  • Transformers
  • Protective System Elements
  • Circuit Breakers and Switchgears
  • Fuses
  • Instrument Transformers
  • Control House
  • Grounding System

Day II

Conductors

  • Classification
  • Conductor sizes
  • Mechanical and electrical characteristics
  • Secondary (low voltage) cables
  • Primary cables
  • stranding
  • Manholes
  • Canadian Electrical Code Requirements -2021

Cable Construction, Standards and Specifications

  • Introduction
  • Cable construction (conductors, insulation, shielding, sheaths, jacket)
  • Conductor and cable: types and applications
  • Insulating Materials
  • Cable sizing considerations
  • Cable standards
  • Cable management system

Pole Structure, Type, and Design

  • Introduction
  • Criteria and Design Standards
  • Poles Stresses
  • Equipment on Poles
  • Wood poles and structures
  • Concrete structures
  • Steel Structures
  • Poles Design Methodology

Day III

Power Systems Studies

  • Short Circuit
  • Load flow and Motor Starting
  • Power quality and Harmonics
  • Protective device coordination
  • Ground Grid Design

Day IV

Arc Flash

  • CSA Z462-2021 definitions and updates
  • Shock hazards an boundary applications
  • Bolted and Arcing Faults
  • Arc Flash hazards and analysis
  • Arc Flash Mitigations

Grounding

  • Purposes of grounding
  • Grounding system types, pros and cons
  • CEC/IEEE requirements
  • Grounding standards
  • Equipment and System Grounding and design

Distributed Generation and Electrical Vehicles

  • Conventional methods of power generation: hydro-generation, steam-generation through burning of coal, liquid or gas fuels, and nuclear
  • Solar Farms and Wind Farms with applications
  • Electrical vehicle (EV) charging and applications based on CEC 2021 rules

Day V

Capacitors

  • Application of low voltage and medium voltage capacitors
  • Shunt vs. series
  • Standards and ratings
  • Application
  • Making currents (energization)
  • Protection and control
  • Economical justification of capacitors’ application

Pad-mounted Distribution Transformers

  • Distribution transformers theoretical background
  • Equivalent circuit of a single-phase transformer
  • Winding connections
  • Cores’ types
  • Amorphous metal
  • Physical properties
  • Insulating oil / PCB issues
  • Ratings and protection
  • Losses and economical comparison
  • Vault-installed transformers

Questions and Answers, Feedback on Achievement of Learning Outcomes

Final Adjournment

Instructor

Khaled Akida, P.Eng., MBA, M.Sc.

Khaled is a registered professional engineer and general manager of TEEBA Engineering Inc. He has extensive experience in substation design, power system studies, power quality audits, EMF and grounding design, field testing and EHS program settings.

Khaled received his M.Sc. from The University of New Brunswick and his MBA from Laurier School of Business. He has managed and executed various electrical engineering projects for major electrical, industrial and commercial facilities in Canada and the US.

He has various IEEE publications, is a technical reviewer for many IEEE journals and is a certified electrical safety trainer for GE. Khaled has been the recipient of GE Management Award and has many leadership certifications from GE Leadership Development Centre at Crotonville.

As a certified electrical safety trainer by GE Corporate, Khaled has taught many technical courses across Canada, USA, Asia and Middle East to industrial customers, electrical consultants and electrical utilities customers.



REGISTER NOW
NOT INTERESTED IN THIS COURSE?

We always want to improve the quality of our courses. Please select any reasons why you feel this course is inadequate (check all that apply).

Please check this box:
Course Rating
4.1 out of 5

Overall rating of this course by its previous attendees!

Fee & Credits

$2995 + taxes

  • 3.5 Continuing Education Units (CEUs)
  • 35 Professional Development Hours (PDHs)
  • ECAA Annual Professional Development Points
Register




OTHER UPCOMING DATES
Group Training
This course can be customized and delivered to your group of staff at your facility, saving time and money.
REQUEST A QUOTE
Sign-up for our newsletter
Canada Job Grant
The cost of this course could be covered by Canada Job Grant.

Your company may be eligible for funding! LEARN MORE
Top