TRAINING.

Essential Concepts of Automation and Control Systems

Online /
Oct 8 - 9, 2024 /
Course Code: 15-1034-ONL24

REGISTER NOW
The confirmation of this course depends on early registration; Register early to avoid the postponement or cancellation of a course.
  • Overview
  • Syllabus
  • Instructor

Overview

Please note, This instructor-led course has specific dates and times:
This course is held online over 2 days on the following schedule (All times in Eastern Time Zone):

10:00 am to 5:30 pm Eastern (Will include a 30 minute lunch break)

After participating in this course, you will be able to:

  • Apply engineering fundamentals, concepts and realization of automated system control laws in the automation field
  • Assess the performance of the supervisory, control and data acquisition of various control systems components and equipment
  • Solve basic control loops
  • Employ your skills in the design, utilization and troubleshooting of equipment

Description
Electrical and mechanical engineers need a basic understanding of control systems and automation. This course provides the fundamentals without delving into complicated mathematical formulas.

The basics of underlying principles for designing, commissioning, and troubleshooting control systems are covered.

Lectures will be followed by simple hands-on exercises and problem-solving sessions.

Who Should Attend
Engineers • Project Engineers • Technicians and Supervisors Involved in the Design, Maintenance and Testing of Control Systems and Industrial Automation • System Integrators of OEM Equipment • Staff Whose Responsibilities Include Commissioning and Troubleshooting of Control Systems • Project Managers and Others who would like to know more about Control Systems and Automation

More Information

Time: 10:00 AM - 5:30 PM Eastern Time


Please note: You can check other time zones here.

Syllabus

Program Outline

Day I

Fundamentals of Control Systems and Automation

  • Systems and controlled systems benefit and historical trends
  • Concepts and principles
  • Linear and non-linear control systems

From Mechanization to Automation and Beyond

  • Analog vs digital world
  • Number representation in computers.
    • Practical exercises
  • Introduction and system theory
  • Definitions and system terms
  • System functions
  • Elements of a control system
  • Open and closed loops
  • Feedback, Feedforward and Cascade loops
  • Proportional, Integral and Derivative control
  • P, PI and PID Tuning methodology

Components of Control Systems

  • Controllers: Theory of operation
  • Hardware architecture: Sensors, Controllers, Actuators, Comms
  • Analog to Digital Conversion
  • Digital to Analog Conversion
  • Software architecture: PLC (Programmable Logic Controller), RTU (Remote Terminal Unit)
  • Embedded solution, Pros and cons
  • Communications: Error Detection, Handshaking, Multiple Attempts
  • Control System Technical Spec: Practical example

From RTU to PLC and SCADA

  • IEC 61131-3 standard for PLCs
  • SCADA, industrial architecture tool for high level process supervisory management

Day II

Distributed Versus Centralized Control Methods

  • Digital logic gates, practical exercises
  • Communication interfaces: Serial, Ethernet, USB, wireless, networks, web
  • HART protocol
  • Modbus protocol
  • Ethernet protocol

Measuring and Testing

  • Statistics, basic ideas
  • Root cause analysis, practical example

Industrial Automation

  • Data processing and presentation tools
  • SCADA modes of operation: operator mode, programming mode, maintenance mode, training mode

SCADA (Supervisory Control and Data Acquisition) Design, Troubleshooting and Commissioning

  • Engineering model for distributed automation and control
  • SCADA modules: visualization, databases, alarm handling, reports, logging and data archiving
  • Alarms handling, practical considerations, and examples

Instructor

Corina Rosenberg, P.Eng

Corina Rosenberg, P.Eng., was System Engineering Manager with Curtiss Wright before recently retiring. She has years of experience in system engineering and control systems. She is also a present member of INCOSE (International Council of Systems Engineering) and has served on the board of TASSQ (Toronto Association of Systems and Software Quality) in the past.




The Engineering Institute of Canada
REGISTER NOW
NOT INTERESTED IN THIS COURSE?

We always want to improve the quality of our courses. Please select any reasons why you feel this course is inadequate (check all that apply).

Please check this box:
Course Rating
4.3 out of 5

Overall rating of this course by its previous attendees!

Fee & Credits

$1295 + taxes

  • 1.4 Continuing Education Units (CEUs)
  • 14 Continuing Professional Development Hours (PDHs/CPDs)
  • ECAA Annual Professional Development Points
Register




OTHER UPCOMING DATES
Group Training
This course can be customized and delivered to your group of staff at your facility, saving time and money.
REQUEST A QUOTE
Sign-up for our newsletter
Canada Job Grant
The cost of this course could be covered by Canada Job Grant.

Your company may be eligible for funding! LEARN MORE
Top