TRAINING.

Challenges in Air Emission Management

Online /
Oct 25 - 27, 2023 /
Course Code: 14-1013-ONL23

REGISTER NOW
The confirmation of this course depends on early registration; Register early to avoid the postponement or cancellation of a course.
  • Overview
  • Syllabus
  • Instructor

Overview

Please note, This instructor-led course has specific dates and times:
This course is held online over 3 days on the following schedule (All times in Eastern Time Zone):

10 am to 6 pm Eastern (Will include the usual breaks)

After participating in this course, you will be able to:

  • Understand federal and provincial regulations and programs that are drivers of air emissions management and control
  • Determine best methods for emissions calculation and reporting
  • Understand how air dispersion modelling and monitoring are used to assess effects on ambient air quality
  • Apply best practices, pollution prevention, and controls techniques to address air pollutants, fugitive dust, or odours
  • Evaluate the effectiveness and select the most suitable emission mitigation approach for your application.

Description
Industry continues to face increasingly stringent requirements to reduce air emissions to meet current regulations and the increasing pressure coming from enhanced public awareness. What will be the new requirements and what should we be doing now is the focus of the conference which brings together industry, environmental consultants, and the regulators to envision the upcoming requirements for the different industries, the available technologies and their best use with the objective of increasing industry’s preparedness to face the impending changes. By taking part in this course, you will enhance your understanding of the potential regulatory compliance requirements for emissions assessment and reporting as well as the implementation of current emission reduction requirements.

By taking part in this course, you will enhance your understanding of the potential regulatory compliance requirements to implement the emission reductions.

Course Outline

  • Regulatory Drivers and Updates Related to Air Emissions
  • Air Quality Considerations in Impact Assessment and Permitting
  • Emissions Quantification Methods
  • Evaluating Air Quality Effects through Monitoring and Modelling
  • Emissions Reporting
  • Emissions Management and Mitigation
  • Case Studies

Who Should Attend
Plant managers • Facility Engineers • Environmental and Engineering Consultants • EHS Managers and Staff • Facility Operators • Regulatory Personnel • Environmental Scientists

More Information

Time: 10:00 AM - 6:00 PM Eastern Time


Please note: You can check other time zones here.

Syllabus

Introduction, Course Preview, Learning Outcomes and Assessment method

Federal Regulation - Air Quality Management

  • Introduction
  • Federal and provincial jurisdiction over air quality and emissions
  • Air aspects of the Canadian Environmental Protection Act
  • Atmospheric Environment considerations in Impact Assessment
  • Environmental Emergencies
  • The Federal Air Quality Management System (AQMS)
  • Airsheds and air monitoring
  • Canadian Ambient Air Quality Standards (CAAQS)
  • Base-level industrial emission requirements (BLIERS)

Permitting and Approvals

  • Technical requirements for impact assessments and project permitting
  • Standards, guidelines, and best practices
  • Assessment criteria (in stack limits, effects on air quality, benchmarks)
  • Ongoing compliance obligations and conditions
  • Ambient air quality standards and criteria
  • Cumulative effects
  • Deposition
  • Air quality and deposition in health risk assessment
  • Case Study

GHG Assessment

  • GHG Programs, Frameworks, and ESG implications
  • Emissions Scopes, Sources, Sinks, Reservoirs
  • GHG Baseline and net GHG emissions determination
  • Accounting and quantification methodologies
  • Emissions reductions towards net zero
  • Quality assurance and verification/validations

Emissions Reporting

  • Annual reporting requirements – NPRI, GHGs, CACs
  • Approaches for data gathering and information management

The Emission Inventory

  • Developing the emission inventory
  • Sources and source types
  • Case study

Emissions Calculation

  • Estimation methods and relative accuracy
  • Emission factors
  • Mass balance
  • Process methods - mass flow calculation
  • Uncertainty

Air Dispersion Modelling

  • Concepts in air dispersion modeling
  • Screening and detailed models
  • Introduction to AERMOD / CALPUFF
  • Input requirements
  • Regulatory guidance
  • Interpretation of model output
  • Special cases
  • Problems and pitfalls
  • Case study

Emissions Measurement I - Source testing

  • Source Testing Methods (continuous monitoring and discrete sampling)
  • Problems and pitfalls
  • Data management and uses
  • Uncertainty

Emissions Measurement II - Continuous emissions monitoring (CEM) systems

  • CEMS equipment
  • Installation and performance
  • Data management, audit and calibration
  • RATAs

Ambient Air Quality Monitoring

  • Designing an ambient monitoring program
  • Instruments and approaches (discrete, continuous, passive, low-cost sensors)
  • Equipment selection and operation
  • Data management (QA/QC, interpretation, reporting)

Group Exercise - Ambient Monitoring

Integrating Emissions Management and Control

  • What drives the level of reduction needed
  • Feasibility studies
  • Developing and optimizing a mitigation plan
  • Management practices and pollution prevention
  • Managing secondary effects
  • Effective emissions capture and transport
  • Fans and exhaust system design considerations

Particulate Matter

  • Dealing with fine particulates
  • Emissions management and controls
  • Particulate sizing and its impact on control
  • Secondary particulate
  • Fugitive dust
  • Case study

Combustion and Combustion Gases

  • Basics of combustion
  • Fuels
  • Combustion gases (O2, NOx, SO2, CO, GHGs)
  • Emissions reduction and controls
  • Mercury, dioxins and furans, and other contaminants
  • Case study

VOCs and Odour

  • Sources and characteristics of VOC and odour emissions
  • Emissions management and controls
  • Odour assessment and management
  • Case study

Final Discussion and Closure

Instructor

Linda Lattner , M.Eng., P.Eng.

Linda Lattner is a licensed professional engineer and is the technical lead for the Air Quality Practice in Ontario. She has more than twenty years of experience in the field of air quality assessment and compliance management.

Her primary responsibilities include air quality compliance management, emission inventory development, greenhouse gas quantification and mitigation studies using GHG frameworks and protocols of Canadian and other global agencies, air dispersion modelling, developing and overseeing ambient air monitoring programs, annual environmental reporting, and leading the air quality technical component of Environmental Assessments and permitting assessments.

With experience that includes notable work for gold and iron ore mining clients, power projects, municipal landfills, and industrial facilities, Linda has provided air quality and fugitive dust management support for mining projects; the cleanup of the radioactive waste repository in Port Granby; Toronto Transit Commission’s Leslie Barns site remediation and facility construction; the remediation of the former gold mine site in Deloro, Ontario; Waterfront Toronto’s Lakefilling Project; and for Metrolinx projects in southern Ontario.

Mrs. Lattner has had the opportunity to work with Environment and Climate Change Canada where she reviewed the GHG reduction potential for major projects subject to federal or provincial environmental assessment. She has also worked for the Canadian Council of Ministers of the Environment as co-author of a study on the Adequacy of Ambient Air Quality Monitoring in Canada, and has developed guidance materials for the Ontario Ministry of the Environment and Climate Change in support of the provincial odour policy and led a training workshop for Ministry operations staff.




The Engineering Institute of Canada
REGISTER NOW
NOT INTERESTED IN THIS COURSE?

We always want to improve the quality of our courses. Please select any reasons why you feel this course is inadequate (check all that apply).

Please check this box:
Course Rating
4.4 out of 5

Overall rating of this course by its previous attendees!

Fee & Credits

$1995 + taxes

  • 2.1 Continuing Education Units (CEUs)
  • 21 Professional Development Hours (PDHs)
  • ECAA Annual Professional Development Points
Register




Group Training
This course can be customized and delivered to your group of staff at your facility, saving time and money.
REQUEST A QUOTE
Sign-up for our newsletter
Canada Job Grant
The cost of this course could be covered by Canada Job Grant.

Your company may be eligible for funding! LEARN MORE
Top