Design of Irrigation Systems Using EPANET Software
Nov 29 - Dec 1, 2021 /
Course Code: 11-0127-ONL21
This course is held online over 3 days on the following schedule (All times in Eastern Time Zone):
10:00 am to 3:00 pm Eastern
After participating in the course, you will be able to:
- have a detail knowledge about irrigation system equipment and components (sprinkler irrigation and micro-irrigation)
- have a basic understanding of irrigation system hydraulics and flow principles
- have a working knowledge of how to work with EPANET software
- have gained experience designing and applying EPANET to design to design an irrigation system
One of the most important aspects of farm and landscape design for those involved in the irrigation industry is design of an optimal irrigation system. From choosing the right layout, equipment and sprinklers/emitters to setting the amount of water, proper irrigation are essential. The main focus of this course is to provide necessary information for professional designing and operating sprinkler and micro irrigation systems for farm/landscape by calculating water requirement based on evapotraspiration, soil and plant root zone water storage capacity.
EPANET software is one of the interesting water distribution system modeling software package developed by U.S. Environmental Protection Agency (EPA). EPANET is widely used to perform extended-period simulation of the hydraulic and water quality behavior within irrigation systems, which consist of pipes, nodes (junctions), pumps, valves, storage tanks, and reservoirs. This training course learn how to use EPANET for the hydraulic simulations of irrigation systems. During the course, design steps will be highlighted through several simple examples and the practical examples are illustrated to show how to apply the EPANET software into practice of pressurized irrigation systems.
- Irrigation water requirement
- Master theory and application principles for hydraulic of pipes
- Introduction to EPANET
- Design of pressurized irrigation systems
- Practical considerations
Who Should Attend:
Agriculture and Enviromental Engineers • Project Engineers and Managers • Consultants • Designers • Operation and Maintenance personnel • Developers • Planners
All software is free and user friendly and trainees after this course will be able to use them for their cases.
1- Cropwat: http://www.fao.org/land-water/databases-and-software/cropwat/en/
2- Epanet: https://www.epa.gov/water-research/epanetMore Information
Time: 10:00 AM - 3:00 PM Eastern Time
Please note: You can check other time zones here.
Irrigation Needs and Irrigation Management
Description of On-Farm Irrigation Systems
- Types of systems
- Distribution methods
Design of On-Farm Irrigation Systems
- Determination of the design value
Pumping Irrigation Water and System Curves
- Performance curves
- Selection of pumps optimal
Design Irrigation System Equipment and Components:
- Sprinkler head selection and placement
- Lateral pipe sizing and Mainline sizing
EPANET software for designing irrigation systems
- Hydraulic concepts
- Network example
- Discharge coefficient of a sprinkler/Emitter
- Lateral on ascending/downward slopes
- Pumping (aquifer, river)
- Determination of the optimal diameter of the pipes
Questions and Answers and Feedback to Participants on Achievement of Learning Outcomes
Hossein Bonakdari, Department of Soils and Agri‐Food Engineering, Université Laval.
Hossein Bonakdari has worked for several organizations like most recently as faculty member of department of Soil and Agri-Food Engineering Department at Laval University, Quebec. He has supervised several PhD and MSc students with teaching experience of more than 16 years in field of Artificial Intelligence application in Civil and Environmental Engineering. His fields of specialization and interest include: practical application of soft computing techniques in engineering problems. Results obtained from his researches have been published in more than 180 papers in international journals (h-index=26). He has also more than 150 presentations in national and international conference. He published two books. Dr. Bonakdari is currently leading several research projects in collaboration with industrials partners.
NOT INTERESTED IN THIS COURSE?
We always want to improve the quality of our courses. Please select any reasons why you feel this course is inadequate (check all that apply).
We currently do not have enough attendee responses to generate a rating for this course.
Fee & Credits
$1295 + taxes
- 1.4 Continuing Education Units (CEUs)
- 14 Professional Development Hours (PDHs)
- ECAA Annual Professional Development Points
OTHER UPCOMING DATES
REQUEST A QUOTE
Canada Job Grant
Your company may be eligible for funding! LEARN MORE