In-Plant Cranes, Hoists and Lifting Devices - Types, Components, Inspection, Operation and Safety

Online /
Jan 28 - 29, 2025 /
Course Code: 15-0110-ONL25

The confirmation of this course depends on early registration; Register early to avoid the postponement or cancellation of a course.
  • Overview
  • Syllabus
  • Instructor


Please note, This instructor-led course has specific dates and times:
This course is held online over 2 days on the following schedule (All times in Eastern Time Zone):

10 am to 6 pm Eastern (Will include the usual breaks)

After attending the course, you will be able to:

  • Have an overall understanding of the various types of in-plant cranes
  • Become familiar with the different types of crane lifting attachments
  • Have a fundamental understanding of the structural, mechanical and electrical components of a crane
  • Appreciate the safety requirements associated with the use of cranes and lifting devices

Most industrial facilities employ cranes and lifting devices as part of their normal operations. An understanding of the various equipment types, along with their usage and operation, are essential from a safety and maintenance point of view as well as for overall plant efficiency.

This course describes the various types and uses of cranes, hoists, and lifting devices available to industrial, commercial and institutional facilities. The inspection and testing of cranes will be addressed, and the structural, mechanical and electrical components of a crane will be presented. Inspection, repair, and operational safety aspects will also be discussed.

Course Outline

  • Types of cranes and hoists
  • Crane structural components
  • Crane mechanical components
  • Crane electrical components
  • Overhead crane runways
  • Lifting attachments and equipment
  • Ropes
  • Crane inspection, repair and testing
  • Crane safety aspects

Who Should Attend
Mechanical Engineers • Technicians • Plant and Facility Managers • Supervisors • Operations and Maintenance personnel • Stationary Engineers • Consultants and Contractors

More Information

Time: 10:00 AM - 6:00 PM Eastern Time

Please note: You can check other time zones here.


Day - 1

Welcome, Introduction, Course Preview, Learning Outcomes and the Assessment Method

Types of Cranes and Hoists

  • Terms and definitions
  • Bridge cranes
  • Gantry cranes
  • Mobile frames
  • Jib cranes
  • Monorails
  • Hoists
  • Explosion proof cranes and hoists
  • Cranes in harsh environments
  • Crane duty classifications
  • Selecting and specifying a crane

Crane Structural Components

  • Strength of materials
  • Design considerations
  • Welding

Crane Mechanical Components

  • Shafts and couplings
  • Gearing
  • Bearings
  • Brakes
  • Hook blocks
  • Rope drums

Crane Electrical Components

  • Enclosures
  • Motors
  • Variable frequency drives
  • Controls
  • Limit switches
  • Conductors

Day - 2

Overhead Crane Runways

  • Stops and bumpers
  • Alignment requirements
  • Inspection plots

Lifting Attachments and Equipment

  • Spreader bars
  • Tag lines
  • Slings
  • Miscellaneous lifting devices: hooks, shackles, eye bolts
  • Magnets
  • Vacuum lifters


  • Reeving
  • Terms and definitions
  • Patterns
  • Lay
  • End fittings
  • Inspection

Crane Inspection, Repair and Testing

  • Crane inspector and maintainer qualifications for overhead and gantry cranes
  • Daily or shift operator checks
  • Operational inspection requirements
  • Periodic inspection requirements
  • Inspection of overhead and gantry crane components: structural, mechanical and electrical
  • Inspection of hoists, mobile frames and jib cranes
  • Crane repair and testing
  • Documentation and log books

Crane Safety Aspects

  • Hand signals
  • Supervisors responsibilities
  • Operators’ and Riggers’ responsibilities
  • Lifting practices
  • Maintainers and other plant workers responsibilities
  • General
  • Consequences of code violations
  • Example of crane incidents

Summary and Final Adjournment


Mike Ivanovic, Ph.D.

Dr. Mike Ivanovic is the President of UBAMIP Consulting and a former Adjunct Associate Professor with over 30 years of experience in thermal engineering. After working in the consulting group of ANSYS Canada Ltd., he now runs the private consulting company UBAMIP Consulting, dealing with analysis and problem-solving in the operation of vital stationary and rotating equipment in the process and petrochemical industry. Mike has also been active in providing training technical courses of various levels of complexity for professionals in the industry in Canada, the USA and overseas.

His expertise, among others, includes the design, operation and maintenance of various types of storage tanks, pressure vessels, piping systems, and pumps and compressors. The focus of the consulting projects has been on risk assessment during operation and maintenance activities, as well as equipment failure analysis and accident prevention technologies based on inspection results and fitness for service studies.

The Engineering Institute of Canada

We always want to improve the quality of our courses. Please select any reasons why you feel this course is inadequate (check all that apply).

Please check this box:
Course Rating
4.5 out of 5

Overall rating of this course by its previous attendees!

Fee & Credits

$1295 + taxes

  • 1.4 Continuing Education Units (CEUs)
  • 14 Continuing Professional Development Hours (PDHs/CPDs)
  • ECAA Annual Professional Development Points

Group Training
This course can be customized and delivered to your group of staff at your facility, saving time and money.
Sign-up for our newsletter
Canada Job Grant
The cost of this course could be covered by Canada Job Grant.

Your company may be eligible for funding! LEARN MORE