Plumbing Systems Design for Multi-Residential, Commercial, Industrial and Institutional Buildings
Online
/
Aug 30 - 31, 2023
/
Course Code: 14-0809-ONL23
- Overview
- Syllabus
- Instructor
Overview
This course is held online over 2 days on the following schedule (All times in Eastern Time Zone):
10 am to 6 pm Eastern (Will include the usual breaks)
After participating in this course, you will be able to:
- Know the key design considerations for building plumbing systems
- Apply codes and standards
- Make sound materials selection decisions
- Select specific equipment and corresponding piping
- Understand why and when specialized piping is used
Description
This course is a comprehensive review of plumbing systems design and is intended for professional engineers and technologists responsible for plumbing system design in commercial, industrial, institutional, and multi-residential buildings.
Course topics include everything you need for designing a commercial plumbing system, from drain, waste and vent systems to domestic hot and cold water distribution systems. The course will cover sizing, layout and selection of all plumbing systems and their ancillary components, such as pumps and pressure booster systems, valves, piping, water heater, and backflow preventers.
Course Outline
- Theory of fixture, sewer, vent and drain pipe
- Sewers &d rains: fixtures, drains and vents
- Domestic hot and cold water piping systems
- Domestic water ancillary systems
- Sump and ejector pumps
- Hydronic systems
- Cross-connection control and backflow prevention
- Valves
- Plumbing system materials selection
- Case Study: Plumbing system design
Who Should Attend
Plumbing Designers • Mechanical Design Engineers and Technologists • Plant Supervisors • Maintenance personnel • Building Officials and Inspectors • Operators and Contractors
Time: 10:00 AM - 6:00 PM Eastern Time
Please note: You can check other time zones here.
Syllabus
Day I
Welcome, Introductions, Seminar Preview and Learning Outcomes
Theory of Fixture, Sewer, Vent, and Drain Pipe Sizing
- Drainage systems
- Soil and waste stacks
- Stormwater
- Piping layout suggestions
- Traps
- Vent systems
- Building code requirements
Sewers and Drains: Fixtures, Drains, and Vents
- System layout
- Fixture diagrams
- Approved methods of venting
- Interceptors: grease, oil, and other
- Designing to building code requirements
Domestic Hot and Cold Water Piping Systems
- Pipe size
- Piping expansion
- Shock absorbers
- Piping layout suggestions
- Building code requirements
Domestic Water Ancillary Systems
- Strainers
- Pressure reducing valves
- Relief valves
- Domestic water booster systems and their selection
- Water treatment: softeners, RO units, iron removal
Sump and Ejector Pumps
- Types
- Pump curves
- Selection and applications
- Sump sizes and accessories
Day II
Hydronic Systems
- Selection of domestic water heaters and storage systems
- Hot water circulating systems and their selection
Cross Connection Control and Backflow Prevention
- Definitions
- Public health hazards
- Theory of backflow, back siphonage
- Backflow prevention equipment
- Cross-connection: how it occurs, how to control it
Valves
- Various types of valves available
- Pressure and temperature ratings (WOG, other)
- Codes and standards
- Materials available
- Recommended uses
- Leakage ratings and seals
- Building code requirements
Plumbing System Materials Selection
Part I: Copper Tubing
- Types of tubing available
- Pressure and temperature ratings
- Weights and sizes
- Fittings-types and assembly
- Codes and standards
- Uses (systems)
- Expansion and compensation
- Fluid friction charts or tables
- Erosion and corrosion factors
Plumbing System Materials Selection
Part II: Plastic Piping for Waste, Vent, Drains, Sewers, and Water (Interior and Exterior)
- Types of tubing available
- Pressure and temperature ratings
- Weights and sizes
- Fittings-types and assembly
- Codes and standards
- Uses (systems)
- Expansion and compensation
- Fluid friction charts or tables
- Erosion and corrosion factors
Case Study: Plumbing System Design
A description of the network and subnets for cold and hot water, sewer, drain, and vent pipes and special fixtures.
Questions and Answers, Feedback on Achievement of Learning Outcomes
Instructor

John F. Daly is a professional engineer and certified plumbing designer. With over 35 years of professional experience, he is currently Vice President/Director of Mechanical/Plumbing Engineering with Trautman Associates, a 50-person architecture and engineering firm headquartered in Buffalo, NY. As vice-president of Trautman Associates, Mr. Daly is the director of the Building Systems Group. He is also a member of ASPE (American Society of Plumbing Engineers) and a frequent speaker and instructor for schools and industry groups.

NOT INTERESTED IN THIS COURSE?
We always want to improve the quality of our courses. Please select any reasons why you feel this course is inadequate (check all that apply).
Course Rating
Overall rating of this course by its previous attendees!
Fee & Credits
$1295 + taxes
- 1.4 Continuing Education Units (CEUs)
- 14 Professional Development Hours (PDHs)
- ECAA Annual Professional Development Points
Group Training
REQUEST A QUOTE
Canada Job Grant
Your company may be eligible for funding! LEARN MORE