How to Prevent Weld Failures Based on CSA W59-24
This course can be customized and delivered to your team where and when it's convenient for you.
Online / On-site
OVERVIEW
Description
After participating in this course, you will be able to:
- Produce an engineering specification to repair, and modify to make a welded structure
- Understand global comprehension of steel and welding metallurgy
- Understand and specify fundamental rules to avoid weld failures
- Learn about conventional and advanced inspection methods PAUT, DR, CR
- Understand the responsibilities of the owner’s engineer to the CSA W59-18 code requirements
Description
Welding is a complex process and is often misunderstood. Most universities do not teach welding engineering to their engineers; however, engineers are required to assume responsibility for welded structures and bridges per the requirements of CSA W59-18, CSA S-6 or CSA S-16.
This course will give you an opportunity to understand welding and related processes and their application. This course will also teach you how to avoid faulty welds in structures by correctly specifying welding and inspection requirements in your contract documents.
This is an interactive course. You are encouraged to bring your welding questions, problems, and projects to the class. Remember, there are no stupid questions!
Course Outline
- Case histories of weld failures
- Understanding why the welds failed
- Welding metallurgy for steel
- HAZ & its characteristics
- Welding processes & inspection
- Welding requirements of CSA W59, S-6 and S-16 & ASME
- Welding certification per CSA W47.1 code
- Engineer’s responsibility per CSA W59 code
- Advanced inspection techniques
- How COBOTs are changing the welding world
- Applying Lean to welding operations to prevent failures
Who Should Attend
Senior & Junior Mechanical & Civil Engineers • Technicians • Plant & Facility Managers • Supervisors • Operations & Maintenance Personnel • Design Engineers • Consultants & Contractors • Inspection Agencies • Lawyers & Insurance Agents
Required Resources:
Participants may want to send in any specific welding related questions ahead of time to EPIC so that potential solutions to these issues can be addressed during the 2-day training session!
Special Features:
The CSA W59-18 code is a good source of welding knowledge for engineers and technicians working in the metal fabrication industry. Although this code is aimed at building large steel structures like skyscrapers, hydroelectric gates, bridges, etc., the principles of metallurgy and welding engineering covered in the code can be applied to a great variety of welded steel components. It is imperative to understand that making sound welds does not only depend on the welder, but it also depends on the welding specification calling for the welds, tracing back the responsibility to the Engineer who writes out the specification and designs the welds. Selection of base materials, welding process, choice of filler metals, welding parameters, sound execution of welds with process control, receiving inspection, in-process inspection and post-weld inspection are part and parcel of the whole package to create sound and reliable welds.
The participants will be required to read several weld failure case histories to understand why weld failures occur. This knowledge will permit the participants to understand the principles of welding metallurgy elaborated during the course and then will further guide them to make pragmatic choices while specifying welding work in their professional practice.
Course Outline
Day 1
- Introduction and needs analysis of participants
- Review of weld failure case histories
- Lessons learnt from case histories to minimize weld failures
- Canadian codes and certification processes: CSA vs AWS standards.
- Steel making, welding metallurgy and the HAZ
- Introduction to Welding and welding processes and code requirements
- Welding defects and their causes - acceptance criteria of Code requirements
- Elaborating Inspection processes - limitations and inspectability of joints
- Mandatory and non-mandatory inspection processes per Code requirements
Day 2
- Scope of CSA welding standards CSA W59, CSA W47.1, CSA W48 and CSA 178.1 & CSA 178.2.
- Canadian Welding Bureau and its mandate to ensure certification to CSA standards
- CGSB qualification of qualified inspectors and CSA 178.1 and CSA 178.2 standards
- Engineers, Supervisors, welders, and Contractor certification to the requirements of CSA W47.1 and W47.2 standards and knowledge base
- CSA W59-13 code, philosophy and make up, clauses 5, 7, 9, 10, 11 and 12
- Engineer's responsibility clauses in CSA W59-18 standard and its implications
- Advanced inspection techniques now permitted in the new CSA W59-18 standard and the engineer's responsibility
Open period for questions and answers for specific questions related to welding problems and solutions